CoastalGuard ® 50 Industrial Coolant and Heat Transfer Fluid

Product Information

CoastalGuard® 50 is a premium engine coolant used throughout the oil and gas industry. It is an inhibited ethylene glycol used as a heavy-duty industrial coolant and heat transfer fluid. The inhibitor system is designed to protect brass, copper, solder, steel, cast iron, aluminum, and other natural metals commonly found in industrial cooling and heating systems.

CoastalGuard® 50 is a 50% solution in deionized water with freeze protection to -34°F.

CoastalGuard® 50 can be reinhibited as needed with CoastalGuard Supplemental Coolant Additives to ensure long service life.

Typical Physical Properties

Density at 60º F. 9.01 lb/gal Specific Gravity @ 60º F 1.08 Freeze Point -34º F (50% Water) Boiling Point 225º F (50% Water) Flash Point COC 247º F pH (33-1/3 vol.% soln.) 10.5 Reserve Alkalinity 11.0 (min)

Coastal Chemical provides technical support for CoastalGuard® 50 via coolant sampling and laboratory testing. Results are reviewed and recommendations are made to ensure proper coolant quality. CoastalGuard® 50 also satisfies all specifications as required by Waukesha, Caterpillar, Superior, and other engine manufacturers.

Handling Precautions

CoastalGuard® 50 is an industrial chemical and should be handled as such. Users should thoroughly review the Material Safety Data Sheets (MSDS) for this product prior to use.

Density

Specific Heat

Thermal Conductivity

Viscosity

For additional product information, please contact:

Coastal Chemical Co.
Houston Sales & Marketing Office
Tel: 713-865-8787

Links To Suppliers & Products

CALGON

---

EXXONMOBIL

---

BASF

---

GRACE

---

HALDOR TOPSOE

---

INEOS

---

LUBRIZOL

---

NORPRO

---

N-SPEC

---

SUMMIT