CoastalGuard ® PG 50 Industrial Coolant and Heat Transfer Fluid

Product Information

CoastalGuard® PG-50 is a specially inhibited 50wt% propylene glycol and Deionized watersolution designed specifically for use in closed loop heat transfer systems, radiators and enginejackets. The inhibitor system formulated into the CoastalGuard® PG-50 provides excellentcorrosion protection for common metals of construction including stainless steel, carbon steel,aluminum, copper, brass, and solder. CoastalGuard® PG-50 also contains the necessaryinhibitors to prevent wet sleeve liner cavitation corrosion. The inhibitor level of the product canbe monitored periodically and replenished when necessary without replacing the fluid itself.

Typical Physical Properties

Form Clear Yellow Green Liquid Density at 60º F. 8.41 lb/gal (typical) Flash Point COC 215º F Freeze Point -30º F (50% Water) Boiling Point 225º F (50% Water) pH 11 Viscosity, 75º F, cP 26 Reserve Alkalinity 11 (min)

Handling Precautions

CoastalGuard® PG 50 is an industrial chemical and should be handled as such. Users shouldthoroughly review the Material Safety Data Sheets (MSDS) for this product prior to use.

The data presented in this bulletin are typical only and not specifications. The information and suggested uses are based onevaluations believed reliable. No guarantee or warranties are expressed or implied, however, including the implied warranty ofmerchantability and fitness for particular purpose. Coastal Chemical Co., LLC disclaims any liability in the use of these data,including possible infringement of patent.

Revision Date: September 10, 2004

For additional product information, please contact:

Coastal Chemical Co.
Houston Sales & Marketing Office
Tel: 713-865-8787

Links To Suppliers & Products

CALGON

---

EXXONMOBIL

---

BASF

---

GRACE

---

HALDOR TOPSOE

---

INEOS

---

LUBRIZOL

---

NORPRO

---

N-SPEC

---

SUMMIT