Locations:

Abbeville, LA - 337.893.3862
Alice, TX - 361.664.8488
Beaumont, TX - 409.842.0777
Broussard, LA - 337.261.0796
Bryan, TX - 979.778.5010
Cleburne, TX - 817.556.9826
Edinburg, TX - 361.664.8488
Evanston, WY - 307.789.7122
Farmington, NM - 505.327.9280
Hebbronville, TX - 361.664.8488
Houston, TX - 713.865.8787
Kilgore, TX - 903.984.5005
Odessa, TX - 432.332.1457
Pasadena, TX - 713.477.6675
Ruston, LA - 318.255.1010

CoastalGuard ® 100 Industrial Coolant and Heat Transfer Fluid

Product Information

CoastalGuard® 100 is a premium engine coolant used throughout the oil and gas industry. It is an inhibitedethylene glycol used as a heavy-duty industrial coolant and heat transfer fluid. The inhibitor system is designedto protect brass, copper, solder, steel, cast iron, aluminum, and other natural metals commonly found inindustrial cooling and heating systems. CoastalGuard® 100 is commonly used in an aqueous dilution from 20 to 50% by volume. These levels providereeze protection between 16°F and -34°F, respectively.

CoastalGuard® 100 has the unique ability to have the inhibitors replenished. They may be monitored andreplaced if necessary without replacing the fluid itself through the addition of CoastalGuard SupplementalCoolant Additives.

Typical Physical Properties

Density at 60º F.	9.42 lb/gal
Specific Gravity @ 60º F	1.136
Freeze Point	9º F (pure) -34º F (50% Water)
Boiling Point	345º F (pure) 225º F (50% Water)
Flash Point	COC 247º F
pH	(33-1/3 vol.% soln.) 10.5
Reserve Alkalinity	11.0 (min)
Foaming Tendency (vol,ml)	40
Break Time (sec)	1.5

CoastalGuard® 100 is designed to be used in a dilutedform, typically 50% water. De-ionized water isrecommended to minimize unacceptable hardnessminerals. CoastalGuard® 100 inhibitor concentrates aredesigned to be mixed with diluted CoastalGuard coolantsto obtain optimum corrosion and freeze protection.

Coastal Chemical provides technical support forCoastalGuard® 100 via coolant sampling and laboratorytesting. Results are reviewed and recommendations aremade to ensure proper coolant quality.

CoastalGuard® 100 also satisfies the specifications asrequired by ASTM D 6210 and meets the coolantrequirements for Waukesha, Caterpillar, Superior, andother engine manufacturers.

Handling Precautions

CoastalGuard® 100 is an industrial chemical and should be handled as such. Users should thoroughly review the Material Safety Data Sheets (MSDS) for this product prior to use.

SPECIFIC GRAVITY
Density

FREEZE POINT
Specific Heat

BOILING POINT
Thermal Conductivity

For additional product information, please contact:

Coastal Chemical Co.
Houston Sales & Marketing Office
Tel: 713-865-8787

Links To Suppliers & Products