Coastal Chemical Company

CoastalGuard ® PG100 Industrial Coolant/Antifreeze

CoastalGuard ® 50

Product Information

CoastalGuard® PG-100 is a specially inhibited concentrated propylene glycol product designed for use in closed loop heattransfer systems, radiators, and engine jackets. CoastalGuard® PG-100 is commonly used in aqueous dilutions from 30 to50% by volume. At these dilution ranges it offers freeze protection from 10ºF to -30ºF. The inhibitor system formulated intothe CoastalGuard® PG-100 provides excellent corrosion protection for common metals of construction. CoastalGuard® PG-100 also contains the necessary inhibitors to prevent wet sleeve liner cavitation corrosion. The inhibitor level of the productcan be monitored periodically and replenished when necessary without replacing the fluid itself.

Typical Physical Properties

Form Clear Yellow/ Green Liquid
Density at 60º F. 8.81 lb/gal (typical)
Freeze Point, °F
Pure: 10 (2000 cP)
50% Water: -30
Boiling Point, °F Pure: 320
50% Water: 225
pH 11.0
Viscosity, 75°F, cP 26.0
Reserve Alkalinity 11.0 (minimum)

 



Application

CoastalGuard® PG-100 should not be used in its concentrate form. It should be diluted with water to a concentration rangeof no greater than 60%. Typically 50% is the maximum concentration in industrial applications. The water used to diluteCoastalGuard® PG-100 concentrate should be clean, clear, potable water, low in chloride and hardness. Avoid using anywater that is brackish or that you could not drink. Deionized or distilled water is ideal to dilute the concentrate.

Handling Precautions

CoastalGuard® PG-100 is an industrial chemical and should be handled as such. Users should thoroughly review theMaterial Safety Data Sheets (MSDS) for this product prior to use.

For additional product information, please contact:

Coastal Chemical Co.
Houston Sales & Marketing Office
Tel: 713-865-8787

Links To Suppliers & Products

Almatis
ANDEROL
CALGON
Conoco
CUNO Filter
ExxonMobil
ENGELHARD
GRACE
INEOS
LUBRIZOL
N-SPEC
SUMMIT