Home |
|
About Coastal |
|
An Invitation |
|
Quality |
|
Products & Services |
|
Contact Coastal |
|
Locations |
|
Customer Service |
|
Process Literature |
|
Turnkey Mgmt. |
|
Field Data Online |
|
Site Map |
Farmington, NM - 505.327.9280
Odessa, TX - 432.332.1457
Kilgore, TX - 903.984.5005
Bryan, TX - 979.778.5010
Ruston, LA - 318.255.1010
Portland, TX - 361.643.4516
Abbeville, LA - 337.893.3862
Lafayette, LA - 337.261.0796
Pasadena, TX - 713.477.6675
Beaumont, TX - 409.842.0777
Fluid Guard™ PG 100
Product Information
FluidGuard™ PG 100 is a specially inhibited concentrated propylene glycol product designed for use in closed loop heat transfer systems. FluidGuard™ PG is commonly used in aqueous dilutions from 20 to 50% by volume. At these dilution ranges it offers freeze protection from -7°C and -35°C ( 19°F and -31°F), respectively. The inhibitor system formulated into the fluidGuard™ PG provides excellent corrosion protection for common metals of construction including stainless steel, carbon steel, aluminum, copper, brass, and solder.
Use of FluidGuard™ PG provides for long fluid life, corrosion protection, and leak protection in piping, pumps, valves, fittings, and heating or cooling equipment. Coastal Chemical provides users of our FluidGuard™ products with complete analytical analyses and technical recommendations on fluid quality and applications.
FluidGuard™ PG applications include heating and cooling systems, line heaters, chillers, refrigeration systems, snow melting systems and HVAC systems. FluidGuard™ PG is commonly used in aqueous dilutions from 20 to 50% by volume. At these dilution ranges it offers freeze protection from -7°C and -35°C (19°F and -31°F), respectively. The inhibitor system formulated into the FluidGuard™ PG provides excellent corrosion protection for common metals of construction including stainless steel, carbon steel, aluminum, copper, brass, and solder.
Use of FluidGuard™ PG applications include heating and cooling systems, line heaters, chillers, refrigeration systems, snow melting systems and HVAC systems. FluidGuard™ PG is not suitable for use where contact with food or potable water is possible.
Typical Physical Properties
| Form | Light Red/ Pink Liquid | ||
| Density at 20°C (68°F) | 8.81 lbs/gal (typical) | ||
| Flash Point | 102°C | ||
| Freeze Point, pure | -55°C (-67°C) | ||
|
-35°C (-31°F) | ||
| Boiling Point, pure | 190°C (374°F) | ||
|
105 °C | ||
| pH | 11.0 | ||
| Reserve Alkalinity | 11.0 (minimum) | ||
| Viscosity, 25°C (77°F) | |||
| Pure | 26cp | ||
|
5.1 | ||
| Specific heat, 60°C (140°F) | .0886 Btu/lb -°F | ||
|
|||
| FluidGuard™ PG 100 is designed to be used in a diluted form, typically 50% or less with water. The water used to dilute FluidGuard™ PG concentrate should be clean, clear, potable water, low in chloride and hardness. De-ionized or distilled water is ideal to dilute the concentrate. Pre-blended FluidGuard™ PG solution are available from Coastal. | |||
Safety & Handling Precautions
FluidGuard™ PG 100 is an industrial chemical and should be handled as such. Person(s) working with this product should read and be familiar with safety precautions detailed in the Material Safety Data Sheet on this product prior to use.
Physical Properties
FluidGuard™ PG 100 properties versus concentrations with water are illustrated below. Additional properties are available in the brochure, FluidGuard™ PG Physical Properties.
 |
 |
 |
The data presented in this bulletin are typically only and not specifications. The information and suggested users are based on evaluations believed reliable. No guarantee or warranties are expressed or implied, however, including the implied warranty of merchantability and fitness for particular purposes. Coastal chemical Co., LLC disclaims any liability in the use of these data, including possible infringement of pantent.